SPRAYABLE URETHANE

      Sprayed urethane allows the covering of all types of surfaces to provide
    a protective barrier against abrasion, chemical attack or just coating.

Application:

• mining equipment
• snow removal equipment
• foam covering
• abrasion protection
• corrosion protection

On which materiel can we apply?

• steel
• wood
• plastic
• concrete
• ....

SPRAYABLE POLYUREA

    Moisture resistant and flexible products, resistant to chemicals and abrasion, a few seconds or minutes to harden even in sub-zero temperatures.

    Typical application: industrial floors, car park roofing and balconies, refineries, pipes,sewage treatment plants, production plants, mining, off-shore platforms, steel bridge marine and many more.

EPAPROOF FPCS 07

    Pure aromatic polyurea elastometic system applied by high pressure spray equipment to protect metals and polyurethane insulation foams and to waterproof cement surfaces and damaged coating

• Color: RAL
• Gel time 8-12 sec
• Hardness: 38-42 sh D
• Recommended rate: 2mm

EPAPROOF FPCS 08

    Pure aromatic polyurea elastomeric system applied by high-pressure spray equipment to protect metals and polyurethane insulation foams and to waterproof cement surfaces and damaged coating

• Color: RAL
• Gel time: 4-6 sec
• Hardness: 46-50 shD
• Recommended rate: 2 mm

EPAPROOF FPCS WFC

    Pure aromatic polyurea elastomeric system for contact with food or drinking water, applied by high-pressure spray equipment to protect metal, polyurethane insulation foams and to waterproof cement surfaces.

• Color: Neutral
• Gel time: 4-6 sec
• Hardness: 46-50 shD
• Recommended depth 2mm
• Compliant with MD 174/04
• Compliant with EU reg 10/2011

EPAPROOF FPCS 29

    Pure aromatic polyurea elastomeric system with particularly low hardness rating, applied by high pressure spray equipment to protect metals, wood, EPS, polyurethane insulation foams ant to water proof cement surfaces.

• Color: RAL
• Gel time: 30-40 sec
• Hardness: 45-55 shA
• Recommended depth: 2mm

EPAPROOF FPCS 94

    Fire resistant, aromatic polyurea elastomeric system, applied by high pressure spray equipment to protect metals, cement surfaces, wood, EPS and polyurethane insulation foam

• Color: RAL
• Gel time: 6-8 sec
• Hardness: 35-40 shD
• Recommended depth:2.5mm
• Euroclass B s2d0 en 135011/2009
• B Roof (t4) EN 13501-5/2005

EPAPROOF FPCS CORE3

    Pure aromatic polyurea elastomeric system with excellent chemical resistance, applied by high pressure spray equipment to all surfaces that have to be protect against chemical agents.

• Color: RAL
• Gel time: 4-7 sec
• Hardness 48-52 shD
• Recommended depth 2.2 mm

EPAPROOF FPCS 02

    Pure aromatic polyurea elastomeric system applied by high pressure spray equipment or special devices that allow use to the product in cartridges. Particularly suitable for protecting metals, cement surfaces, wood and EPS.

• Color: RAL
• Gel time: 75-85  sec
• Hardness: 46-50 shD
• Recommended depth: 1.8 - 2.5mm

EPAPROOF STS 06

    Dual component hybrid aromatic elastomeric system applied by high pressure spray equipment to protect and waterproof cement surfaces, wood, EPS and polyurethane insulation foams.

• Color: Grey
• Gel time: 5-7 sec
• Hardness: 38-42 shD
• Recommended depth: 2.5 mm

EPAPROOF FCA 900

Aliphatic pure polyurea elastomeric system with excellent yield and resistance to UV, applied by high pressure spray equipment to protect cement, wood, EPS and polyurea surfaces

• Color: RAL
• Gel time: 3-5 sec
• Hardness: 60-70 shD

EPAPROOF FCA 930

Aliphatic pure polyurea elastomeric system with excellent yield and resistance to UV, applied by high pressure spray equipment, especially suitable for protecting metal

• Color: RAL
• Gel time 30-35 sec
• Hardness:60-70 shD

EPAPROOF FPGS 16

    Polyaspartic aliphatic coating. A dual component elastomeric system based on aliphatic isocyanates and special amines for laying colored coating to protect and waterproof substrates whose aesthetic properties must be retained. to protect metals, terraces, balconies, swimming pools, fountains and wood.

• Processing time: 20-25 min
• Hardness: 40-45 shA

EPAPROOF FPGS 40

    Dual component coating for manual application particularly suitable for protecting and waterproofing substrates such as marble, tiles, cement surfaces, metals and wood, for flooring, swimming pools and fountains and for providing an anti-corrosion coating for metals.

• Color: RAL
• Processing time 10-15 min
• Hardness: 45-50 shA

EPACOLOR FPHS 17

    Elastomeric system based on aliphatic isocyanates and special amines for laying transparent and colored coatings to protect and waterproof substrates whose aesthetic properties must be retained. UV resistant for use on cement, metal, marble, tiles, wood and GRP

• Color: Clear
• Processing time: 45-50 min